Keystone RV Forums - View Single Post

beemerguy · 07-28-2018, 08:24 AM

Yes, I have had to replace two. They are not hard to replace, just pushed in. I had a lot of wire when pulled out. I have six lights, three on each side. I used DRYCONN connectors, a little large but would fit in the hole, there's a lot of room inside that cap. I got the replacement LED,s from: L.O.F. Inc. 1739 Cassopolis St. Elkhart IN 46514. Now these are brighter than the original ones. I bought ten, so I can replace all of them. My wiring: blue/white from trailer went to black wire of the LED. This is the hot side.
Hope this helped

ron

07-28-2018, 08:24 AM	#2
beemerguy Member Join Date: Mar 2010 Location: Hiawassee,Ga. Posts: 50	Yes, I have had to replace two. They are not hard to replace, just pushed in. I had a lot of wire when pulled out. I have six lights, three on each side. I used DRYCONN connectors, a little large but would fit in the hole, there's a lot of room inside that cap. I got the replacement LED,s from: L.O.F. Inc. 1739 Cassopolis St. Elkhart IN 46514. Now these are brighter than the original ones. I bought ten, so I can replace all of them. My wiring: blue/white from trailer went to black wire of the LED. This is the hot side. Hope this helped ron __________________ 2015 FUZION 371 2016 Dodge BigHorn dually, 4x4, 8' bed, Aisin, 5th wheel Prep. 1978 BMW R100RS 1974 VW Thing