Keystone RV Forums - View Single Post

BobMcC · 07-12-2018, 07:40 AM

I ran a 45' primary wire (16 ga) under my Carbon 347 and tied into the yellow wire in the junction box at the pin box. This was already wired to the reverse light in the 7 pin connector, it was just dead ended in the junction box. I added an Xsprite white LED (https://xpriteusa.com/1pc-4w-white-4...be-light-head/) to the center rear, just below the ramp hinge.

I also added a few other LED assemblies to "get noticed" when stopping. The original lights are simply not enough to make me feel safe when stopping.

07-12-2018, 07:40 AM	#19
BobMcC Junior Member Join Date: Jan 2018 Location: Covington Posts: 14	Backup Light I ran a 45' primary wire (16 ga) under my Carbon 347 and tied into the yellow wire in the junction box at the pin box. This was already wired to the reverse light in the 7 pin connector, it was just dead ended in the junction box. I added an Xsprite white LED (https://xpriteusa.com/1pc-4w-white-4...be-light-head/) to the center rear, just below the ramp hinge. I also added a few other LED assemblies to "get noticed" when stopping. The original lights are simply not enough to make me feel safe when stopping.