Quote:
Originally Posted by jsmith948
Sorry the pics are not in order. I drilled two small holes in the knob 180 deg apart. Bent the wire into a "u" and then threaded it through the holes and then bent the ends toward the inside of the knob. You can buy a kit at CW for about $26. This was free.
|
Very creative! If I continue to shrink I may have to make me one of those
__________________
Danny and Susan, wife of 56 years
2019 Ram 3500 Laramie CC SWB SB 6.4 4x4 4.10
2020 Montana High Country 331RL
|