Quote:
Originally Posted by sourdough
It seems that the screws holding the underbelly are an issue for all of us. On my 2nd trip I hit a rainstorm in hwy 49 in LA. It was a heavy storm and lasted for an hour or so as we were traveling. I stopped for gas and saw water pouring out from under the RV. The front of the bottom liner was hanging down and water was just pouring from the top of the lining. I had to drive back home to TX like that. Thankfully it stopped raining and the wind hopefully dried things out.
When we returned I took it into CW to be repaired. Although it was 2 month out of warranty Keystone approved the repairs. All but 2 of the screws across the front were either rusted off or had completely missed the liner. Just the force of the wind would have pulled the liner off. I had them replace all the screws and install a piece of flashing across the front to stop any intrusion of air or water between the liner and the front of the trailer.
|
.com
I have finally figured out my underbelly water issue (9 years later).
The left side underbelly has only 3 screws attaching it. They are there to clamp the propane black pipe from tanks to the RH distribution place. I happened to push up on the droopy belly and watched the coroplast slide back and forth.. A screw up at manufacture? Will follow your plan for the front flashing.