Quote:
Originally Posted by thanket
No holding tank, just rails for the slide. I would have to look to see how much space between the side of the bed and the rails. How did you go about putting in the drawer? Probably easy for someone who knows what they are doing. LOL
|
Ahh so it sounds like you may have room to put a drawer up above the rails.
1- I determined the drawer size and ordered a cabinet door that matches the interior woodwork from Trekwood. I found a door that would fit closest to the size drawer I wanted. then, I built the drawer "box" out of plywood. I attached the cabinet door to the drawer box to create the completed drawer.
2- I cut the hole in the face of the bed. I added the supports that the drawer glides would be mounted to under the bed.
3- I added the full extension drawer glides to the drawer and to the supports under the bed.
4- I slid the drawer into place.
I hope this helps! Its the steps in basic form.