[Bignewsantafe]

My slides cut out because the iN-Command system voltage drops below 10.5 volts and I have a new set of Lifeline GPL-6CT's and the voltage at the pump stays above 12 volts. Also put in a 50amp thermo breaker in for the pump. iN-Command say says it need to be hard wired to a manual switch and they will pay for it. Camping World want us to bring it in to check it out and then bring it back for the repair. That's 400 miles over 4 trips of driving and 4 days off of work to do it too!
Chuckster57 would you know what it would take to wire in the manual switch? I do wiring for work and very good a reading diagrams.
Has anyone else come down with this problem?

Thanks in advance.
Bignewsantafe
Allen