Keystone RV Forums - View Single Post

**chuckster57** · 05-20-2018, 05:47 AM

You probably need to “rehome” the jacks. Make sure everything is clear, extend the rear jacks 6-8 inches. Then press and hold retract until all jacks start to retract, let go and ALL THE JACKS will retract. Once they have, you should have cleared the error and can lift the front back up.

MAKE SURE YOUR TV ISNT UNDERNEATH the front.

If it’s ground control 3.0 that system is very sensitive to low voltage.

05-20-2018, 05:47 AM	#3
chuckster57 Site Team Join Date: Jul 2014 Location: Modesto Posts: 20,348	You probably need to “rehome” the jacks. Make sure everything is clear, extend the rear jacks 6-8 inches. Then press and hold retract until all jacks start to retract, let go and ALL THE JACKS will retract. Once they have, you should have cleared the error and can lift the front back up. MAKE SURE YOUR TV ISNT UNDERNEATH the front. If it’s ground control 3.0 that system is very sensitive to low voltage. __________________ 2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel. Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS. Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.