Quote:
Originally Posted by JCordill
I have an 02 Cougar 245EFS 5th wheel and was wondering how to overide the electric slide out. I can't find where you would attach a ratchet or crank handle. This is a small slide out and is electric only, no hydraulics. I have a manual from Lippert but it is not for my model. My electric motor is a Dewald #017010. Does any body else have this model and do you know how to manualy overide the slide out?
|
Slide manual locations.
1: Hydraulic: need to release pressure at manifoLd (google instructions)
2: cable roller system, look at the interior molding at top, a larger decor plate I’d located in center. Remove screw, molding and you will find the mechanical fittings to drive cable. Alternative location under couch.
3. Direct drive lower rail style: same approach , manual fitting located under couch, bench or bed inside the slide. Very similar to cable locations.
Best to google model of device for any special hints or suggestions
WLWAYS CHECK FUSES FIRST! There may be a second one near motor unit , also.
Good luck, LH