[flybouy]

Originally Posted by W7PSK

Took it back for no power and they couldnt find anything

I had used a meter Neutral to power (each leg) on the power cords and measured voltage. Rig checked out again ... so on a whim I bought a new power cord

Its now working.

RVs drive me nuts.

My guess would be that the neutral conductor wasn't carrying the load. One strand of wire would give you a voltage with no load. I would bet that if you take the two ends of that cable that you replaced and check the resistance (ohms) from plug to end you will find the culprit, the leg with high the resistance. If you do find it, remove the plug and check again. If all good replace the plug and have a spare or better yet buy m & fm plugs and you have an extension chord.