Keystone RV Forums - View Single Post

packrat1969 · 08-01-2018, 02:48 AM

Hi,

For those of you with one of these steel bumper-mounted grill arms. Has anyone modified theirs to swing out more than 90 degrees from the bumper? It would involve cutting out the existing swing stop rod and then possibly drilling some new holes in the hinge bracket to insert a second removable hitch pin. Any pitfalls to this mod that you've encountered and can tell me about before I start cutting and drilling?

For some reason I cannot "insert" pics inline from my local hard drive, so I have "attached" some relevant images instead.

packrat

08-01-2018, 02:48 AM	#1
packrat1969 Junior Member Join Date: Jul 2018 Location: NE Wisconsin Posts: 29	Considering Grill Arm Modification Hi, For those of you with one of these steel bumper-mounted grill arms. Has anyone modified theirs to swing out more than 90 degrees from the bumper? It would involve cutting out the existing swing stop rod and then possibly drilling some new holes in the hinge bracket to insert a second removable hitch pin. Any pitfalls to this mod that you've encountered and can tell me about before I start cutting and drilling? For some reason I cannot "insert" pics inline from my local hard drive, so I have "attached" some relevant images instead. packrat Attached Thumbnails __________________ TT: 2017 2520RL, Twin Trojan T105s, BM-1 Compact, Xantrex SW1000, Curt Roundbar WDH TV: Mostly stock 2016 Bluejeans F-150 XLT FX4 SCrew 5.0, 6.5' bed...