Keystone RV Forums - View Single Post

RCrawler · 04-02-2012, 07:28 PM

So far, I haven't had any issues with cracking on mine. I run with the bumper extended and have a 4- bike rack mounted on behind that.

I'm going to cut off the thin sheetmetal bumper and replace it with some thicker wall material. And since the spare drags going up the driveway, I'm going to redesign the mount so that it is higher and solidly mounted to the bumper, with no more cute little u-bolts. I really like the toolbox that was mounted and I might do something similar with the slide out rack to get rid of some Rubbermaid containers.

Jason

04-02-2012, 07:28 PM	#21
RCrawler Senior Member Join Date: Jun 2011 Location: Southern Oregon Posts: 118	So far, I haven't had any issues with cracking on mine. I run with the bumper extended and have a 4- bike rack mounted on behind that. I'm going to cut off the thin sheetmetal bumper and replace it with some thicker wall material. And since the spare drags going up the driveway, I'm going to redesign the mount so that it is higher and solidly mounted to the bumper, with no more cute little u-bolts. I really like the toolbox that was mounted and I might do something similar with the slide out rack to get rid of some Rubbermaid containers. Jason __________________ '11.5 (EDITED) 3500 CCLB 4x4 (EDITED) 6.7 HO, auto, DPF and EGR deleted by (EDITED) , Mini Maxx, 5" exhaust, '12 (EDITED) 324RLB- 3 bedroom, 1 1/2 bath