JRTJH, Thanks for a good idea. I've been having a problem with the Marineco shore power inlet mount (3 screw). The screw at the 1 o'clock position kept pulling loose. Today I removed the plug and saw that the screw's hole was stripped out. It appeared to be from original installation; I found the flat ends of two electrical zip-ties that had been used as shims in the hole. Rather than replacing the entire inlet with a different hole pattern, I was trying to think of something to use as a mounting plate for the original device. Your suggestion of a plastic cutting board is just what I need, but I probably would've wandered around Lowe's for two hours trying to find something. Now I can just stop at the local Wal-Mart! Thanks!
Sent from my ASUS Transformer Pad TF700T using Tapatalk
|