|
I have a 2011 Laredo Keystone and I could not figure out how to get to the water heater to winterize my rig and I saw the posts here yesterday and decided I would figure it out today. Well I looked through the hole in my storage area and saw the water heater and removed that panel, it had 10 screws. after removing it I just flipped the 1/4 turn valve to by pass the heater tank, after removing the tank drain plug, also saw the water pump, which had a 1/4 turn valve and a hose for the antifreeze. Went inside and turned the pump switch on and began pumping the fluid through each faucet. Oh, I drained the water tank first. Used almost 2 gal. Hardest part was getting the 10 panel screws out, nothing in the owners manual told me about the panel.
|