Quote:
Originally Posted by shiloh55
I would appreciate the pictures if not to much trouble. The only reason I wanted to use the side compartment was the ease of removing the plywood side panel and I would not have to re-vent the batteries since the new compartment would be open to the old, and it is vented to the outside at the bottom. I will take a look at the front compartment though as you suggested. thanks..
|
Here are the pictures of what I did. It may help you decide what will work best for your application....
In the first two you can see the plywood, covered with the "felt like carpet" from WalMart, the rear molding I cut to seal the small gap, and the wiring from the batteries in the front compartment.
In the third, you can see the plywood from underneath the coach. I plan to seal that with spray undercoating, but haven't got it finished yet.
In the fourth, the battery box as seen in the front compartment. Excuse the mess, we just got back from a 2 week trip and haven't got things "reorganized" yet.....