|
Keith, it would be helpful for this, and future posts if you were to put your RV year, make and model in the signature line in your profile for us.
On my unit, the gas line pipe hangs on the frame, and was already plumbed for an external grille, so I just swapped the fitting and regulator on my Blackstone for a female quick-connect gas fitting.
When I got my unit (used, private party) my quick-connect valve had a slight leak, so I replaced it. They are readily available at the RV stores, and come in a kit with both the male and female end. It is a type that looks like a male air quick connect fitting, except it has a safety valve in the form of a lever, which locks the female end from the grille to it.
My unit uses conventional threaded 1/2" black gas pipe. If you have any gas appliances, just `T' into the line at the nearest point where you want your grille to attach. Be sure to check for leaks before using it, with soapy water.
|