Keystone RV Forums

Keystone RV Forums (http://www.keystoneforums.com/forums/index.php)
-   Keystone Questions (http://www.keystoneforums.com/forums/forumdisplay.php?f=62)
-   -   Quick Connect LPG (http://www.keystoneforums.com/forums/showthread.php?t=33199)

AbHDToyHauler 05-31-2018 08:20 AM

If you have a BBQ store or Fireplace store they can often put you onto the right fittings. What BBQ is it? If it's the Webber Q1200 (very popular one) then you take out 2 screws to release regulator (reduces pressure from High pressure in bottles to low pressure) and unscrew regulator carefully. The pressure from the trailer fitting is low pressure already so no regulator required. I did mine. It's working great and very convenient. I think the fitting is 1/8" pipe threads. The connectors to low pressure on trailer are made for propane and like Chuckster said , use the right fitting. It's important.

bfisher003 05-31-2018 10:11 AM

These people were great to work with when I converted our Weber Q1200 to run off the QD at the back of our trailer. They will show or tell you everything you need and even sell it to you and you can have the hoses made to any length you want. Shipping was quick, too.
http://="https://caloreequipment.com...fittings.html"

Their phone number is: 888-291-6665

quball19 05-31-2018 10:21 AM

1 Attachment(s)
I put this on grill then get a quick connect hose Attachment 16705

quball19 05-31-2018 10:24 AM

1 Attachment(s)
Quote:

Originally Posted by quball19 (Post 288739)
I put this on grill then get a quick connect hose Attachment 16705

I have 2 hooked up to trailer Attachment 16706

JimQ 05-31-2018 10:37 AM

Quote:

Originally Posted by quball19 (Post 288740)
I have 2 hooked up to trailer Attachment 16706

I'm looking into doing this. Is there a splitter in your set up to run both at the same time?

Travelinlou 05-31-2018 11:14 AM

You can get the hose kits from Amazon or eBay. Camperland also.

Harleydodge 05-31-2018 11:14 AM

Quote:

Originally Posted by JimQ (Post 288743)
I'm looking into doing this. Is there a splitter in your set up to run both at the same time?


You could make up your own manifold, or go this route if you'd rather:
http://propanegear.com/propane-quick...er-rv-fitting/

lonewolftx 05-31-2018 07:06 PM

Try this. . .
 
Quote:

Originally Posted by notanlines (Post 287672)
Ptooti, I believe this will get you going in the right direction:

https://www.rvupgradestore.com/MB-St...-p/66-7119.htm

I’m thinking this isn’t the one you want. It has a screw in male end vs. a quick connect one. I’ve converted a Coleman roadtrip grill to my 5th wheel propane port. There are several brass hardware fittings needed and a 12’ quick connect hose from Camping World or wherever. Here are the parts:
• Parker Brass Pipe Fitting, 90 Degree Street Elbow, 1/8" NPT Male X 1/4" NPT Female https://www.amazon.com/dp/B000FMWZZ6?ref=yo_pop_ma_swf
https://www.campingworld.com/propane...full-flow-plug
https://www.campingworld.com/12-quic...-hose-assembly

This is a picture of a typical regulator and you use the brass piece by attaching it to the male quick connect noted above and the brass elbow.
https://www.campingworld.com/coleman...lacement:cool:

villui 06-02-2018 02:12 AM

Connecting from quick connect to a standalone grill? Not directly from from propane tank?

ptooti 06-02-2018 02:28 PM

This is the ticket!!
 
This along with the quick connect hose will allow me to use my toolbox grill perfect thank you!!!
And thank you all for sharing input and knowledge!
:):):):)

https://www.amazon.com/Camco-57274-C...olympian+grill


Quote:

Originally Posted by flybouy (Post 288489)
Olympian Grills sells a conversion kit https://www.amazon.com/Camco-57274-C...olympian+grill



All times are GMT -8. The time now is 04:22 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.