PDA

View Full Version : Flat Screen TV Mount


Ruffus
01-22-2010, 08:00 AM
Good morning all. We just purchased a new sprinter fifthwheel. My wonderful wife wants me to mount a 37inch flat screen LCD TV where the current 32 inch tv is mounted. Has anyone tried this. I have no idea what kind of studding are in these interior walls. Any info is appreciated.

hankpage
01-22-2010, 10:03 AM
Congratulations on your new trailer. If the 32" is wall mounted the same mount should fit a 37". Measure the screw hole pattern on the back of both sets .... if they are the same the mount should be rated for your new set. I wish my wife would make me put a bigger tv in my trailer ..... I'm jealous, Hank ;)

Ruffus
01-22-2010, 12:21 PM
Thanks Hank. My wife is just spoiled, thats the TV I bought for her in the bedroom and she doen't want another one bought for the bedroom in the trailer. I'll do some measuring tomorrow, thanks again.

Steersall4
01-31-2010, 08:12 AM
of course the walls/framing in these things are NOT MUCH. having an 04 Cougar and spend lots of the winter in S. texas in it, I carefuly rearraned our entertainment cntr. to accomodate a 32". But knowing there was not much in that wall and the shower on the other side decided NOT to mount the thing. IT only weighs 27# so when we are out ON THE ROAD it lays on its back in the center of the bed. have had a couple near panic stops and it has never shifted one bit. worse case I have to take it out and lay it on the bed before I run the slide out IN. this (magnavox) has a DVD player built in the pedistal and does not show, only the slot. when all is set up it looks as tho the TV belongs there.

Ruffus
01-31-2010, 04:25 PM
That gives me more to think about, thanks for the ideas.

Steersall4
01-31-2010, 04:58 PM
I should have mentioned too that the TV has rode like that from N. Indiana to South Texas and back 3 times, and once a month all over Indiana the last 3 yrs. I reckon it has just enough weight to keep it right in the middle of the bed !!

soundman
02-16-2010, 10:01 AM
Good morning all. We just purchased a new sprinter fifthwheel. My wonderful wife wants me to mount a 37inch flat screen LCD TV where the current 32 inch tv is mounted. Has anyone tried this. I have no idea what kind of studding are in these interior walls. Any info is appreciated.

Hello Jim
Most flat panel tv mounts a universal, you maybe able to use the same mount from the 32". You should be able to lift the tv from the wall mount remove the bracket from the 32", mount it to the 37" and place it back on the wall mount.
Keep me posted.

jpatt
08-15-2010, 05:20 AM
We have a new (to us) 2009 Cougar 5ver and the previous folks took the TV mount..not the wall plate. I don't see any markings on the wall plate. Does anyone know where to get the TV mount portion?

Clemdog
08-15-2010, 05:34 AM
"We have a new (to us) 2009 Cougar 5ver and the previous folks took the TV mount..not the wall plate. I don't see any markings on the wall plate. Does anyone know where to get the TV mount portion?"

Try monoprice.com for flat panel mounts and adaptors.