In command system

[mach11961]

Can you have 2 cell phones on a in command system

[Tinner12002]

Yes, each would have to have its own passcode.

[mach11961]

Thanks it paired but has gotten to ask for a passcode
Thanks again

[MattHelm21]

Actually, the answer is only yes with Adroid devices. Because of IOS(iPhone, iPad) bluetooth issues(security I think), only one of those devices may be connected at a time. Whichever is connected seems to reset some kind of security so no other IOS device previously paired can connect.

[mach11961]

Thanks I've tried for a while and with no luck.
Thanks again

[Tinner12002]

You are correct that only one device can connect at a time but multiple devices can be programed to run the system, makes no difference whether its an android or iPhone.
I know our phones were kinda hard to get connected the first time, had to do the Bluetooth search and scan several times before they would find each other.

[mach11961]

It found the the second phone and paired but I couldn't get the two connected. My phone doesn't have a problem. We are using the IPhones
Thanks

[Tinner12002]

There are several good youtube videos on the system that may answer some of you issues also.

[mach11961]

Yeah I've saved a lot of them. But I haven't seen one on multi phones
Thanks

[MattHelm21]

From the manual:

"Switching Between Handheld Devices and Units
The JRVCS1 is able to have seven handheld devices paired to it at any given time(not including the DC). Three Android devices and one iOS device are able to be actively paired to each unit."

Edit: I guess this doesn't mean you can log in from all the devices at once but there is a difference between what the Adroid devices can do and IOS.

[mach11961]

Thanks so we both have IOS IPhone and it can only have one from what I I'm reading
Thanks again

[MattHelm21]

Correct. I really wanted to use my iPad while inside but be able to use my iPhone if I was outside but that is just a no go.

[mach11961]

Thanks it was worth the try thanks for your help

[lonewolftx]

From the manual:
To
"Switching Between Handheld Devices and Units
The JRVCS1 is able to have seven handheld devices paired to it at any given time(not including the DC). Three Android devices and one iOS device are able to be actively paired to each unit."

Edit: I guess this doesn't mean you can log in from all the devices at once but there is a difference between what the Adroid devices can do and IOS.

It will only allow one device at a time to control it. We found you have to delete that one for it to recognize another. :banghead: