View Full Version : Raptor 300MP Wheels
mjbarr99
05-22-2011, 11:24 AM
I just bought a used 2010 Raptor 300MP and want upgrade the ST tires. I was thinking of going to a 235/85R16 BFG Commercial T/A tire but it's only rated for 3042lb @80psi which doesn't give me much margin over the 6K axle. I haven't weighed the trailer fully loaded yet but plan on doing so next week.
My other thought is going to load range G tires (Goodyear G14) but I don't know if my wheels are rated to 110psi.
Any thoughts?
I have a 2010 Fuzion 383. It had 235 80 R 16 Carlise on it. I took them off Friday and put 750 R 16 Hankook tires thy are 14 ply steel belted. They are almost three times as heavy as the Carlise tires and a lot cheaper than the Goodyear G614. They are rated for 3330 pounds at 106 PSI. My 383 has 7000 pound axles on it . I have read some reviews on the G614s about having blow outs on different forums. The hankook has good reviews. Good luck with what you choose. George
KenBob
05-23-2011, 08:21 AM
Never go down on tire load carrying capacity. Stay the same or go higher.
I was looking for tires for our Fuzion 360. Goodyear G614s were the only choice for me for direct replacement. Went with new wheels and goodyear G114 17.5" load range H tires. The initial cost is substantial, but the peace of mind is priceless. JMHO
Will have a set of 110 psi rated wheels available in about a week.
mjbarr99
05-23-2011, 10:04 AM
Will have a set of 110 psi rated wheels available in about a week.
KenBob,
I sent you a PM
CWtheMan
05-28-2011, 06:51 PM
The absolute minimum tire requirement for 7000# axles is tires that will support 7000#.
CW
vBulletin® v3.8.9, Copyright ©2000-2024, vBulletin Solutions, Inc.