PDA

View Full Version : Wired Backup Camera


kenn209
03-20-2011, 02:39 PM
First major mod to our new Cougar, I added a wired back up camera from this place Rear View Safety, (rearviewsafety.com) We purchased item RVS-770613-213 which included 7" TFT LCD, 30° camera infra-red night vision and all the wires, connectors and mounts. I also purchased the license plate mount for the camera.

I ran the cable underneath the camper by removing the under pinning screws one at a time and putting the cable on the other side of the screw and then putting the screw back in. There was plenty of cable so I put the rest of the cable up in the underpinning as well, I ran the cable around the front right landing gear in the front storage compartment and drilled a hole in the storage compartment for the connection. did the same to the truck. I want to move the camera to the middle under the back window of the camper but unsure of how to mount. Any ideas? What type screws etc?

Here are some pics
http://www.keystoneforums.com/attachments/photobucket/img_10282_0_33955d6551854c7d3408a60e2e6b82e4.jpg
http://www.keystoneforums.com/attachments/photobucket/img_10282_1_5b4f725e1364b326386125bede4ced01.jpg
http://www.keystoneforums.com/attachments/photobucket/img_10282_2_84a985f19a9058ffa132941a1d701a48.jpg
http://www.keystoneforums.com/attachments/photobucket/img_10282_3_2d5e2c231e9434a6c0446d9e98e8e7be.jpg

cumminsdad08
04-04-2011, 09:00 AM
looks great, good picture too, but how do you know what radio station is on now:rolleyes:. fastenall sells black pan head screws, that don't rust, we use them for our decorative hardware on the outside of our doors we install and they work awsome. i am not sure what the backside of your bracked looks like, but if it is smooth i would try them. they self tap so quick and easy to run in. i would run them in, back them out, put a little silicone on them then reinstall them. that would help with water and such, and hopfully keep them from vibrating out. as for the wire, i wouldn't know what to dowith that, maybe just run it down the back and get some of those screw in wire holders??? or you could run a hold inbehind the bracket, but then you got a hole there when it gets removed. if you come up with an idea, be sure to put it up here, i was half thinking on getting one myself

SLIMSHADIE
04-04-2011, 08:39 PM
Kenn looks good. How is the monitor mounted? Looking for a similar installation.

I remember seeing somebody mounting a camera on a 1x1 3-4' bar centered on the back bumper. I don't remember if it was by itself or just sticking above the spare tire. Kind of like extending the tire holder and mounting th camera on top. No drill on back of the camper and you can zip tie the cable to the holder. It was on here or rv.net. Good luck.

kenn209
04-05-2011, 07:37 AM
Well in my dodge there is a little compartment underneath the radio, So I bought a a hunk of wood from Home depot. mounted the screen to it. and then I shoved a shim on top of the oak plank, since the compartment tapers at the rear. Will post a pic. It's made to be removed when/if DW let's me trade up to a DRW 2007 Ram 3500... lol

I know its not pretty but its temp...

http://www.keystoneforums.com/attachments/photobucket/img_11091_0_5b2f2900595fae4d61e9f2b39415cbba.jpg

Here is a pic of the connection on the bumper.

http://www.keystoneforums.com/attachments/photobucket/img_11091_1_125908531dbc66878355ed701b86cc64.jpg

kenn209
04-05-2011, 07:46 AM
As for the radio, we don't listen too much to the radio, I like to concentrate on road noise. I'm paranoid about blow outs etc. One good thing about the whole setup is I can see when I pass people and I am clear of them. The camera has a 130 degree field of view so on the edges of the screen kind of fish eye a little... No big deal.

kenn209
04-05-2011, 07:51 AM
looks great, good picture too, but how do you know what radio station is on now:rolleyes:. fastenall sells black pan head screws, that don't rust, we use them for our decorative hardware on the outside of our doors we install and they work awsome. i am not sure what the backside of your bracked looks like, but if it is smooth i would try them. they self tap so quick and easy to run in. i would run them in, back them out, put a little silicone on them then reinstall them. that would help with water and such, and hopfully keep them from vibrating out. as for the wire, i wouldn't know what to dowith that, maybe just run it down the back and get some of those screw in wire holders??? or you could run a hold inbehind the bracket, but then you got a hole there when it gets removed. if you come up with an idea, be sure to put it up here, i was half thinking on getting one myself

WIll check those out. Thanks

cumminsdad08
04-08-2011, 05:09 PM
i can't believe that they don't sell a suciton cup mount for that, kinda like you would have for a gps. if they do i would get that. if you don't want it on the windshield (and the jersey state police don't like it much too, ask me how i know), they usually sell a little flat plastic plate that you can double side tape to the front of your dash, kinda like you have it now. what i did with my GPS is actually super glued the mount to that black plastic holder and stuck that to my dash. i never had any problems with it ever falling off after that. then if you do switch trucks you can just pop off the plate and clean off the tape. which i just recently did in my work truck.

kenn209
04-09-2011, 07:05 AM
Va it's illegal to have anything attached to the windshield. But not sure if they enforce it or not. But I guess they could use it as an excuse to pull you over. Will have to see what I can do for suction mount to the dash..

LarryL
04-12-2011, 05:11 PM
Well I talked the DW into letting me buy one,and there out of stock:(
That one looked the best,had the quick disconect.
Emailed they asked when they would be back in stock hope for a reply soon.

kenn209
04-13-2011, 11:07 AM
Hopefully they will have one soon. It's a very easy install.

LarryL
04-13-2011, 05:31 PM
kenn209 they will be back in stock 4/20/2011 I will order one then,:Dwhat side is your camera on?
and the wire from bumper to dash did you go through firewall?
My cougar has a slideout bike rack with a 1'' pole that is by the spair tire
I'm thinking of putting the camera on top of it,but it might get to much
movment there.
my lic plate is on the right side and I carry bikes.

kenn209
04-14-2011, 03:21 AM
Mine is on the license plate, I ordered the plate holder and ran the wire down to the under pinning. I took out screw by screw and put the wire on the inside of the screws, Worked very nice. I also put the extra cable up in there. I can see on the screen just the very corner of the spare tire. So will move that a few inches or I', planning on mounting the camera under the back window. I used a 7/8 metal hole saw for the quick disconnects and I ran the wire down the driver side of the truck and drilled a hole there and then sealed it up after I ran the wire into the cab. Wasn't to happy about drilling a hole but didn't want to go thru the firewall.

LarryL
04-14-2011, 05:50 AM
Boy you get up early,looks like in about 2 weeks I will be able to
install mine.
I will send pic of my install if I can figure out how to put them on the fourm
like you did.
I think I'm going to try and put the camera on the ladder.

kenn209
04-14-2011, 05:56 AM
Yeh I looked at that, on their site is a person who put it on the ladder. Let us know how it works out.

JRTJH
04-14-2011, 07:21 AM
Most trucks have rubber plugs in several holes in the floor. It might be simpler and much less "traumatic" to cut an "X" in one of the plugs, slip the wiring through that hole and use silicone to reseal the plug. That way, if you ever decide to remove the wiring, at the most, you'll need to get another rubber plug to replace the cut one. No drilling, no rust and hopefully a fully functional camera system without damage to the vehicle. I've run several wires through plugs like this in the past with good results.

kenn209
04-14-2011, 11:20 AM
I saw the rubber plugs, but wasn't sure what they were for. Guess I do now. Oh well, Live and Learn. Should have asked here first. Anything I can do to close the hole better?

cumminsdad08
04-14-2011, 04:38 PM
x2 on the plugs, i have many "accesories" in my truck, plus power adders and on the dodge there is a really nice hole with nothing else in it that will fit just about any gauge wire you can put on a truck. if only i can remember exact location off the top of my head, oh well if anyone needs to know they can ask and i can crawl under and look

rev114
04-16-2011, 02:20 AM
I got my system from RearViewSystems (http://www.rearviewsystems.com/ys5600.html) and have been very happy. I am only posting because I originally had a wire size like yours (between the truck and the camper) and found that it did not hold up to wind lashing and the plug/unplugging. I went with the Heavy Duty Trailer Tow Quick Disconnect Kit (about halfway down the link I posted above).

Don't let the price scare you, the company worked with me on a package deal (even worked with me upgrading to the HD disconnect kit). I moved the disconnect to the bed of my truck so my camera connection is right above my power connection (same size plug but different configuration so you cannot plug in the wrong one after a rough NASCAR weekend!)

I can go take some pictures if anyone expresses interest

LarryL
04-17-2011, 11:07 AM
yes please do I will be ordering my camera this week and i think the quick disconect comes with the camera i well be ordering.
the q/d # is RVS213

rev114
04-17-2011, 04:07 PM
I have attached some pics (another pic to come, hit the max of 5)

The first pic is the bed of my truck... The bottom plug is the 5er plug, the one above is the rear view camera using the hardware and wires they provided.

The second pic is the screen in my truck. I ran the wires from the plug under my truck to the engine compartment and then thru the firewall under the dash. I hooked to fused ignition power (so I cannot leave the screen on and run down the battery)

The third pic is the plug on the 5er. The orange wire came from RVS, as did the plug. I ran the wire (again, came from RVS) from the back of the plug (waterproof connections) all the way to the back of the camper (it is a 50ft wire, no connections) inside of some gray PVC (for further protection, see the next pic) on the underside of the camper.

Then the last pic shows how I come out of the pipe and into the molding to get to the top of the camper.... the only hole I made was out of the bottom insulation of the front compartment) The next section will show the camera...

rev114
04-17-2011, 04:08 PM
This pic shows the camera in the center, up high, above my toy hauler door

EDIT - Wow - What lousy pictures..... view them here:

http://imageevent.com/fileupload.jsp?url=reavviewcamera&f=

The password is: raptor

I am loading them now, should be available by 2100 EST

SJMcKee
04-21-2011, 04:52 AM
Nice job, were looking at something similiar, has anyone got experience with the wireless model that camping world sells. Want to avoid running a lot of wire!!!

haffcke
02-07-2012, 02:15 PM
tried the wireless route on a 28ft. TT behind my econoline ford van, not happy with the reception from camera, jumpy fading in and out, not a cheap unit at 185.00 either, ordered enough wire to hard wire whole system, now have trailer camera on full time (run with lights on always) plus reversing camera on van, mounted van camera between hitch and bumper, back right to tra. coupler perfect,

michaeliack
03-25-2012, 04:44 PM
For those looking to install a backup camera on their trailer, consider this option: Instead of buying an expensive turnkey system for $200-$300 that comes with a camera, a monitor and cables, consider upgrading your stereo to one with a screen (Pioneer 4300 is under $350 and comes with anytime rear view camera view, dual zone entertainment, etc.). Then buy a camera off of EBay or Amazon for $30 to mount to your Trailer. The final product is pretty clean (less wires and clutter on your dash), has much more functionality, and is a better price for the money (in my opinion) than other options.

http://thumb0.webshots.net/t/90/90/0/10/10/2563010100107147540rePwxB_th.jpg
http://thumb0.webshots.net/t/90/90/0/10/10/2563010100107147540rePwxB_th.jpg (http://rides.webshots.com/photo/2563010100107147540rePwxB)
http://thumb0.webshots.net/t/87/187/1/43/72/2333143720107147540lSWrdo_th.jpg
http://thumb0.webshots.net/t/87/187/1/43/72/2333143720107147540lSWrdo_th.jpg (http://rides.webshots.com/photo/2333143720107147540lSWrdo)
http://thumb0.webshots.net/t/81/81/5/32/38/2297532380107147540hcHtMx_th.jpg
http://thumb0.webshots.net/t/81/81/5/32/38/2297532380107147540hcHtMx_th.jpg (http://rides.webshots.com/photo/2297532380107147540hcHtMx)