Pressure & temp. settings for a new tire monitor system.

[ToyTLH]

Just purchased a TST TM-507RV/SG tire monitor system with four flow through sensors for a 2012 Raptor 300MP.

I run the Raptor's four tires at 80 psi. I was thinking using 70 psi for the min pressure but would you use for the high pressure setting?

What would you use for the high temperature setting?

Thanks for the great forum!

[davidjsimons]

20% is the recommended high variance, so 96 lbs. There is a factory default setting for temperature and is suggested that you do not change that setting.


Sent from my iPad using Tapatalk